Lockpick
CURRENTLY UNDER BETA TESTING! An interactive cutaway lockpicking minigame on a real 3D lock. Hold tension with the wrench, feel for the binding pin, and lift each pin to the shear line while the pick wears and can snap.
ESX
QBCore
Qbox
CURRENTLY UNDER BETA TESTING! An interactive cutaway lockpicking minigame on a real 3D lock. Hold tension with the wrench, feel for the binding pin, and lift each pin to the shear line while the pick wears and can snap.
Pick a real lock with 3 to 9 pins.
Hold tension and find the binding pin.
Picks gouge, bend, and snap.
Wear is saved to the inventory pick.
Picks are reserved and results verified.
Start attempts from any resource.
Locks with 3 to 9 pins, each with its own housing, cylinder, pins, and springs.
Randomized binding order, spring return, oversetting, and a tension dial with a working band.
Light tension finds the binding pin. Lift it until it clicks and stays up, then find the next one. Lifting too far jams the pin until tension is released.
The pick wears from overload tension and from forcing wrong or set pins, with gouged, bent, and snapped pick models.
Inventory picks keep their own durability, with wear-stage icons. A worn pick also looks worn in the minigame.
A tension wrench is required for every attempt. It has no durability and is never consumed.
The close-up anchors on the target, such as a car door handle, and checks that the camera has a clear view.
A details panel with controls and technique tips opens during an attempt, which pauses while it is open.
Picks are reserved on the server, results are validated there, and a win quicker than the fastest possible solve is rejected.
Exports start and cancel an attempt, prepare an exact pick slot, and check the result on the server.
Server hooks and events fire for started and finished attempts.
Zyke Vehicle Keys and Zyke Wheelclamp use the minigame automatically while it is running.
Everything you need to know about getting Lockpick running on your server. Can't find your answer? Our team is active in Discord.
Built on Zyke's Library for framework and inventory bridging. Everything below is supported out of the box.
Make sure these resources are started before Lockpick in your server.cfg.
Usually, yes. Framework and inventory bridging goes through Zyke's Library, so most setups work out of the box. Heavily modified servers may need small adaptations.
Not sure about your setup? Ask in Discord before claiming or downloading and we'll take a look.
Everything you need to install, configure and get help with Lockpick.